What makes a laboratory smart? Inside Turkestan’s new connected facility
November 16, 2026
Temperature, humidity and air quality affect how comfortable we feel at home or at work. Inside a laboratory, however, maintaining the right conditions goes far beyond comfort. Changes in temperature can affect how samples and reagents are stored, while conditions in laboratory rooms need to be carefully monitored as staff carry out their daily work.
This means keeping track of a surprisingly wide range of indicators. Is a refrigerator maintaining the required temperature? Is the air quality in a particular room within the acceptable range? Has a window been left open? Is there a water leak somewhere in the building?
At the National Center of Expertise Virology Laboratory in Turkestan, Kazakhstan, a Biosafety Level 2 laboratory, many of these questions can now be answered through a single digital dashboard. The technology was introduced through a pilot implemented by United Nations Development Programme (UNDP) in Kazakhstan, with specialized technical expertise from the UNDP Smart Facilities team. The pilot brings sensors, wireless communication, local data storage and a Digital Twin together in a working laboratory environment.
A network of 54 sensors has been installed across the facility to monitor conditions in laboratory rooms, refrigerators and freezers, detect water leaks, and track the opening and closing of refrigerator doors and windows.
The Turkestan laboratory was established under Kazakhstan's national pandemic preparedness initiative, with the support from Pandemic Fund and in cooperation with the Ministry of Health, the World Health Organization (WHO) and UNDP. UNDP supported the development of the facility, from construction to the procurement of laboratory equipment and technological solutions.
Following the laboratory’s opening in September 2026, UNDP drew on its own resources and the expertise of its global Smart Facilities team to introduce a digital monitoring system. This investment goes beyond the Pandemic Fund-financed infrastructure project, complementing it with UNDP’s own technical expertise and resources to create additional value for national partners.
From manual checks to digital monitoring
Until recently, monitoring many of these conditions was a manual part of the laboratory staff’s daily routine. Employees measured room temperature and humidity using a hygrometer and recorded the results in a logbook. Today, staff can view much of this information digitally.
Mereke Turebekova, a doctor at the Turkestan virology laboratory, showing the logbooks.
“Previously, laboratory staff checked refrigerator temperatures in the morning and evening using a thermometer and recorded the readings in a logbook. Now, the system displays the readings automatically. It can also show when a refrigerator was opened or when there was a power interruption, and alert us if there is a water leak,”says Mereke.
Staff can now view information they previously gathered separately through one interface, while historical readings remain available for later review. Technology does not replace the laboratory staff’s judgement; it gives them more information about what is happening around the facility and can draw their attention when a monitored condition changes.
Giving the laboratory digital senses
At the centre of the system is the Internet of Things, or IoT. The term describes physical objects equipped with sensors that collect information about their surroundings and communicate that data to a digital system.
In the Turkestan laboratory, environmental sensors monitor indicators including temperature, humidity, carbon dioxide and particulate matter in the air. Staff can examine conditions in individual rooms or view air-quality information across the facility. Upper and lower limits can also be set for different indicators, allowing staff to adjust the thresholds according to their monitoring needs.
These measurements have very practical uses. A high CO₂ reading, for instance, can indicate that a room needs ventilation, while elevated levels of particulate matter may prompt staff to check whether cleaning or another response is needed. Other sensors monitor equipment: temperature sensors track refrigerators and freezers where laboratory materials are stored, while water-leak sensors can provide an early warning of a potential problem. Contact sensors register whether refrigerator doors and windows are open or closed. The system can also be configured to flag conditions such as a window remaining open beyond a specified time on the dashboard.
For dozens of small sensors like these to work across a facility, they also need a way to transmit information without drawing much power. The sensors communicate using LoRaWAN (Long Range Wide Area Network), a low-power wireless networking protocol designed to transmit small amounts of data over long distances while minimising energy consumption. This low power use helps extend battery life, which in the current configuration is expected to be around two to five years, depending on the device settings reporting intervals, and conditions inside the facility.
A Digital Twin of the laboratory
Collecting the measurements is only the first part of the process. From a sensor somewhere in the laboratory, the information travels via LoRaWAN through the IoT gateway and Smart Facility Edge Mini to the local server, before becoming available through the Digital Twin. The system operates entirely locally, meaning that the data is collected, stored, processed and visualized within the laboratory, with no data transmitted or stored outside the laboratory environment.
The laboratory has its own local server, which can retain data for up to five years. Staff can select a particular period, review previous readings and export the information when needed. For cold storage, for example, this means they can look back at refrigerator or freezer readings and see how conditions changed over time.
On screen, the information is presented through the facility’s Digital Twin, a digital representation that connects real-world data from the physical laboratory with a virtual view of that environment. The Digital Twin is built on the laboratory's actual floor plan, with sensors positioned on the digital map according to their physical locations. This allows users to visualise the laboratory, monitor sensor readings in real time, and gain an immediate understanding of environmental conditions across different areas, all through a single, intuitive interface.
“The entire building has been digitized. Staff can see where each sensor is located, what information it is transmitting and its current status, and monitor the readings in real time,”explains Pavel Mkrtchyan, UNDP Smart Facilities Analyst.
If, for example, the temperature inside a refrigerator moves beyond the predefined range, the system can display an alert on the dashboard and identify where the problem is occurring. The reason may be as simple as a door that was not closed properly, or it may point to an equipment or power issue that requires attention.
The digital infrastructure also needs to keep operating through power interruptions. An uninterruptible power supply, or UPS, can keep the Smart Facility system running for up to two days, while the system can record when an outage occurred and how long it lasted.
A pilot for smarter facilities
The Turkestan installation is a pilot, designed to test how Smart Facility technologies work in a functioning laboratory and what can be learned from their day-to-day use. Implemented by UNDP in Kazakhstan with technical expertise from the UNDP Smart Facilities team, the pilot has involved not only deploying the technology but also preparing the people who will use and support it.
The UNDP Smart Facilities team trained a local technical team to work with and support the system, helping build local capacity for its continued operation. Laboratory staff also received training on dashboard operation, monitoring and routine administration, and the system was handed over for operational use.
The Turkestan pilot also provides an opportunity to understand where a similar approach could be useful in the future. It brings technologies that can sound abstract, from IoT and low-power wireless communication to a Digital Twin, into a setting where their purpose is very practical.